Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles

Jaime Cueva; Cristian Yalama; Fredy Llulluna; Myrian Larco; Claudio Cordova

doi:10.11159/icmie21.112

Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles

Jaime Cueva
, Cristian Yalama
, Fredy Llulluna
, Myrian Larco
, Claudio Cordova

Facultad de Ciencias Socio Ambientales

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This resecahc present, the improved cooling system of a vehicle has been developing research of new materials that help dissipate heat inside the engine more efficiently, it is for this reason that in this research project coolants were developed under the ASTM D-3306 standard using nanofluids with nanoparticles of titanium dioxide ( 93.9 nm ) and silicon ( 96.3 nm ) produced by attrition milling, centrifuging and filtering dioxide, which were used in a vehicle gasoline of 1600 cc engine and fuel injection, in order to analyze the thermal and mechanical behavior of the vehicle, compared to commercial coolants on the market, for it touch and power tests, dynamic emissions and fuel consumption ASM were performed. Better engine performance was obtained when using coolants with titanium dioxide and silicon dioxide nanoparticles, the greatest increase was the titanium.

Original language	English
Title of host publication	Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021
Editors	Huihe Qiu, Yuwen Zhang
Publisher	Avestia Publishing
ISBN (Print)	9781927877616
DOIs	https://doi.org/10.11159/icmie21.112
State	Published - 2021
Event	7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021 - Virtual, Online Duration: 2 Aug 2021 → 4 Aug 2021

Publication series

Name	Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering
ISSN (Electronic)	2369-8136

Conference

Conference	7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021
City	Virtual, Online
Period	2/08/21 → 4/08/21

Bibliographical note

Publisher Copyright:
© 2021, Avestia Publishing. All rights reserved.

Keywords

coolant
nanofluid
nanoparticle
silice
titanium

Access to Document

10.11159/icmie21.112

Cite this

Cueva, J., Yalama, C., Llulluna, F., Larco, M., & Cordova, C. (2021). Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles. In H. Qiu, & Y. Zhang (Eds.), Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021 (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering). Avestia Publishing. https://doi.org/10.11159/icmie21.112

Cueva, Jaime ; Yalama, Cristian ; Llulluna, Fredy et al. / Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles. Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021. editor / Huihe Qiu ; Yuwen Zhang. Avestia Publishing, 2021. (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering).

@inproceedings{6a82e02d38b5484abd07af89c7e61417,

title = "Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles",

abstract = "This resecahc present, the improved cooling system of a vehicle has been developing research of new materials that help dissipate heat inside the engine more efficiently, it is for this reason that in this research project coolants were developed under the ASTM D-3306 standard using nanofluids with nanoparticles of titanium dioxide ( 93.9 nm ) and silicon ( 96.3 nm ) produced by attrition milling, centrifuging and filtering dioxide, which were used in a vehicle gasoline of 1600 cc engine and fuel injection, in order to analyze the thermal and mechanical behavior of the vehicle, compared to commercial coolants on the market, for it touch and power tests, dynamic emissions and fuel consumption ASM were performed. Better engine performance was obtained when using coolants with titanium dioxide and silicon dioxide nanoparticles, the greatest increase was the titanium.",

keywords = "coolant, nanofluid, nanoparticle, silice, titanium",

author = "Jaime Cueva and Cristian Yalama and Fredy Llulluna and Myrian Larco and Claudio Cordova",

note = "Publisher Copyright: {\textcopyright} 2021, Avestia Publishing. All rights reserved.; 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021 ; Conference date: 02-08-2021 Through 04-08-2021",

year = "2021",

doi = "10.11159/icmie21.112",

language = "Ingl{\'e}s",

isbn = "9781927877616",

series = "Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering",

publisher = "Avestia Publishing",

editor = "Huihe Qiu and Yuwen Zhang",

booktitle = "Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021",

}

Cueva, J, Yalama, C, Llulluna, F, Larco, M & Cordova, C 2021, Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles. in H Qiu & Y Zhang (eds), Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021. Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, Avestia Publishing, 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021, Virtual, Online, 2/08/21. https://doi.org/10.11159/icmie21.112

Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles. / Cueva, Jaime; Yalama, Cristian; Llulluna, Fredy et al.
Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021. ed. / Huihe Qiu; Yuwen Zhang. Avestia Publishing, 2021. (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles

AU - Cueva, Jaime

AU - Yalama, Cristian

AU - Llulluna, Fredy

AU - Larco, Myrian

AU - Cordova, Claudio

PY - 2021

Y1 - 2021

N2 - This resecahc present, the improved cooling system of a vehicle has been developing research of new materials that help dissipate heat inside the engine more efficiently, it is for this reason that in this research project coolants were developed under the ASTM D-3306 standard using nanofluids with nanoparticles of titanium dioxide ( 93.9 nm ) and silicon ( 96.3 nm ) produced by attrition milling, centrifuging and filtering dioxide, which were used in a vehicle gasoline of 1600 cc engine and fuel injection, in order to analyze the thermal and mechanical behavior of the vehicle, compared to commercial coolants on the market, for it touch and power tests, dynamic emissions and fuel consumption ASM were performed. Better engine performance was obtained when using coolants with titanium dioxide and silicon dioxide nanoparticles, the greatest increase was the titanium.

AB - This resecahc present, the improved cooling system of a vehicle has been developing research of new materials that help dissipate heat inside the engine more efficiently, it is for this reason that in this research project coolants were developed under the ASTM D-3306 standard using nanofluids with nanoparticles of titanium dioxide ( 93.9 nm ) and silicon ( 96.3 nm ) produced by attrition milling, centrifuging and filtering dioxide, which were used in a vehicle gasoline of 1600 cc engine and fuel injection, in order to analyze the thermal and mechanical behavior of the vehicle, compared to commercial coolants on the market, for it touch and power tests, dynamic emissions and fuel consumption ASM were performed. Better engine performance was obtained when using coolants with titanium dioxide and silicon dioxide nanoparticles, the greatest increase was the titanium.

KW - coolant

KW - nanofluid

KW - nanoparticle

KW - silice

KW - titanium

UR - https://www.scopus.com/pages/publications/85139053676

U2 - 10.11159/icmie21.112

DO - 10.11159/icmie21.112

M3 - Contribución a la conferencia

AN - SCOPUS:85139053676

SN - 9781927877616

T3 - Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering

BT - Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021

A2 - Qiu, Huihe

A2 - Zhang, Yuwen

PB - Avestia Publishing

T2 - 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021

Y2 - 2 August 2021 through 4 August 2021

ER -

Cueva J, Yalama C, Llulluna F, Larco M, Cordova C. Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles. In Qiu H, Zhang Y, editors, Proceedings of the 7th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2021. Avestia Publishing. 2021. (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering). doi: 10.11159/icmie21.112

Evaluation of the Use of Titanium and Silicon Nanoparticles for the Improvement the Thermal Conditioning System in Vehicles

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this